International Journals (corresponding author*)
39. J. Kwon, S.-M. Baek, H. Jung, J.C. Kim, S.-Y. Lee, S.S. Park*, "Role of microalloyed Sm in enhancing the corrosion resistance of hot-rolled Mg-8Sn-1Al-1Zn alloy", Corrosion Science, 185 (2021) 109425
38. S.-Y. Lee, H.-J. Lee, J.-H. Baek, S.S. Park*, J.G. Lee*, "Microstructural and corrosion properties of Ti-to-Zr dissimilar alloy joints brazed with a Zr-Ti-Cu-Ni amorphous filler alloy", Metals, 11 (2021) 192
37. S.-M. Baek, S.-Y. Lee, J.C. Kim, J. Kwon, H. Jung, S. Lee, K.-S. Lee, S.S. Park*, "Role of trace additions of Mn and Y in improving the corrosion resistance of Mg-3Al-1Zn alloy", Corrosion Science, 178 (2021) 108998
36. J. Lee, S.-M. Baek, C. Boo, A. Son, H. Jung, S.S. Park*, S.W. Hong*, "Water deoxygenation using a hollow fiber membrane contactor to prevent pipe corrosion for sustainable management of district heating systems: a pilot-scale study", Journal of Cleaner Production, 277 (2020) 124049
35. O. Kwon, Y.I. Kim, K. Kim, J.C. Kim, J.H. Lee, S.S. Park, J.W. Han*, Y.-M. Kim*, G. Kim*, H.Y. Jeong*, "Probing one-dimensional oxygen vacancy channels driven by cation-anion double ordering in perovskites", Nano Letters, 20 (2020) 8353-8359
34. G.-W. Park, H. Jo, M. Park, B.-J. Kim, W. Lee, S. Shin, S.S. Park*, Y.-S. Ahn*, J.B. Jeon*, "Effect of heat treatment and drawing on high-manganese steel pipe welded by gas tungsten arc", Metals, 10 (2020) 1366
33. B. Kim, C.H. Hong, J.C. Kim, S.-Y. Lee, S.-M. Baek, H.Y. Jeong, S.S. Park*, "Factors affecting the grain refinement of extruded Mg-6Zn-0.5Zr alloy by Ca addition", Scripta Materialia, 187 (2020) pp. 24-29
32. S.-Y. Lee, S.-M. Baek, E.-J. Gwak, N.-R. Kang, J.-Y. Kim, S.-H. Kim, J.G. Lee, S.S. Park*, "Fabrication of high-strength duplex nanoporous Cu by dealloying a dual-phase Mg-Cu precursor alloy", Journal of Magnesium and Alloys, 8 (2020) pp. 910-916
31. D. Lee, B. Kim, S.-M. Baek, J. Kim, H.W. Park, J.G. Lee, S.S. Park*, "Microstructure and corrosion resistance of a Mg2Sn-dispersed Mg alloy subjected to pulsed electron beam treatment", Journal of Magnesium and Alloys, 8 (2020) pp. 345-351
30. D. Lee, B. Kim, S. Lee, S.-M. Baek, J.C. Kim, H.-T. Son, J.G. Lee, K.-S. Lee*, S.S. Park*, "Enhanced corrosion resistance of Mg-Sn-Zn-Al alloy by Y microalloying", Scripta Materialia, 163 (2019) pp. 125-129
29. S.-M. Baek, J.S. Kang, J.C. Kim, B. Kim, H.-J. Shin*, S.S. Park*, "Improved corrosion resistance of Mg-8Sn-1Zn-1Al alloy subjected to low-temperature indirect extrusion", Corrosion Science, 141 (2018) pp. 203-210
28. S. Kim, H.J. Jung, J.C. Kim, K.-S. Lee, S.S. Park, V.P. Dravid*, K. He*, H.Y. Jeong*, "In situ observation of resistive switching in an asymmetric graphene oxide bilayer structure", ACS Nano, 12 (2018) pp. 7335-7342
27. S.-M. Baek, B. Kim, S.S. Park*, "Influence of intermetallic particles on the corrosion properties of extruded ZK60 Mg alloy containing Cu", Metals, 8:323 (2018)
26. J.C. Yu, J.A. Hong, E.D. Jung, D.B. Kim, S.-M. Baek, S. Lee, S. Cho, S.S. Park, K.J. Choi, M.H. Song*, "Highly efficient and stable inverted perovskite solar cell employing PEDOT:GO composite layer as a hole transport layer", Scientific Reports, 8:1070 (2018)
25. B. Kim, J.C. Kim, S. Lee, K.-S. Lee, J.G. Lee*, S.S. Park*, "High-strain-rate superplasticity of fine-grained Mg-6Zn-0.5Zr alloy subjected to low-temperature indirect extrusion", Scripta Materialia, 141 (2017) pp. 138-142
24. M.-S. Jang, I.-J. Roh, J. Park, C.-Y. Kang, W.J. Choi, S.-H. Baek, S.S. Park, J.-Y. Yoo, K.-S. Lee*, "Dramatic enhancement of the saturation magnetization of a sol-gel synthesized Y3Fe5O12 by a mechanical pressing process", Journal of Alloys and Compounds, 711 (2017) pp. 693-697
23. B. Kim, S.-M. Baek, J.G. Lee, S.S. Park*, "Enhanced strength and plasticity of Mg-6Zn-0.5Zr alloy by low-temperature indirect extrusion", Journal of Alloys and Compounds, 706 (2017) pp. 56-62
22. S.-M. Baek, J.S. Kang, H.-J. Shin, C.D. Yim, B.S. You, H.-Y. Ha, S.S. Park*, "Role of alloyed Y in improving the corrosion resistance of extruded Mg-Al-Ca-based alloy", Corrosion Science, 118 (2017) pp. 227-232
21. B. Kim, S.S. Park*, J.G. Lee, G.T. Bae, C.G. Lee, C.D. Yim, J.H. Kim, N.J. Kim, "Microstructure and mechanical properties of twin-roll cast Mg-6Zn-1Mn-1Al alloy joined by surface-friction welding", Materials Characterization, 124 (2017) pp. 8-13
20. S.-M. Baek, H.J. Kim, H.Y. Jeong, S.-D. Sohn, H.-J. Shin, K.-J. Choi, K.-S. Lee, J.G. Lee, C.D. Yim, B.S. You, H.-Y. Ha*, S.S. Park*, "Effect of alloyed Ca on the microstructure and corrosion properties of extruded AZ61 Mg alloy", Corrosion Science, 112 (2016) pp. 44-53
19. B. Kim, S.-M. Baek, H.Y. Jeong, J.G. Lee, S.S. Park*, "Grain refinement and reduced yield asymmetry of extruded Mg-5Sn-1Zn alloy by Al addition", Journal of Alloys and Compounds, 660 (2016) pp. 304-309
18. B. Kim, J.G. Lee, S.S. Park*, "Superplasticity and load relaxation behavior of extruded Mg-8Sn-3Al-1Zn alloy at 250 °C", Materials Science and Engineering A, 656 (2016) pp. 234-240
17. H.-Y. Ha, H.J. Kim, S.-M. Baek, B. Kim, S.-D. Sohn, H.-J. Shin, H.Y. Jeong, S.H. Park, C.D. Yim, B.S. You, J.G. Lee, S.S. Park*, "Improved corrosion resistance of extruded Mg-8Sn-1Zn-1Al alloy by microalloying with Mn", Scripta Materialia, 109 (2015) pp. 38-43
16. H.J. Kim, B. Kim, S.-M. Baek, S.-D. Sohn, H.-J. Shin, H.Y. Jeong, C.D. Yim, B.S. You, H.-Y. Ha*, S.S. Park*, "Influence of alloyed Al on the microstructure and corrosion properties of extruded Mg-8Sn-1Zn alloys", Corrosion Science, 95 (2015) pp. 133-142
15. J. Kim, S.S. Park, H.W. Park*, “Corrosion inhibition and surface hardening of KP1 and KP4 mold steels using pulsed electron beam treatment", Corrosion Science, 89 (2014) pp. 179-188
14. D.H. Kim, Y.-S. Shim, C.W. Moon, J.-M Jeon, H.Y. Jeong, S.S. Park, Y.-W. Kim, J.-S. Kim, J.-H. Lee*, H.W. Jang*, “Vertically ordered hematite nanotube array as an ultrasensitive and rapid response acetone sensor”, ACS Applied Materials & Interfaces, 6 (2014) pp. 14779-14784
13. H.Y. Jeong, B. Kim, S.-G. Kim, H.J. Kim, S.S. Park*, “Effect of Ce addition on the microstructure and tensile properties of extruded Mg-Zn-Zr alloys”, Materials Science and Engineering A, 612 (2014) pp. 217-222
12. H.-Y. Ha*, J.-Y. Kang, S.G. Kim, B. Kim, S.S. Park*, C.D. Yim, B.S. You, “Influences of metallurgical factors on the corrosion behaviour of extruded binary Mg-Sn alloys”, Corrosion Science, 82 (2014) pp. 369-379
11. B. Kim, C.H. Park, H.S. Kim, B.S. You, S.S. Park*, “Grain refinement and improved tensile properties of Mg-3Al-1Zn alloy processed by low-temperature indirect extrusion”, Scripta Materialia, 76 (2014) pp. 21-24
10. C.H. Park, H.Y. Jeong, G.S. Eom, H.-T. Son, H. Yu, S.S Park*, “Fabrication and mechanical behavior of Al-Mg alloy ferrules”, Korean Journal of Metals and Materials, 52 (2014) pp. 47-53
9. H. Yu, S.H. Park*, B.S. You, Y.M. Kim, H.S. Yu, S.S. Park, “Effects of extrusion speed on the microstructure and mechanical properties of ZK60 alloys with and without 1 wt.% cerium addition”, Materials Science and Engineering A, 583 (2013) pp. 25-35
8. J.G. Lee, C.H. Kim, K.H. Kim, S.S. Park, M.K. Lee*, C.K. Rhee, “Brazing characteristics of a Zr-Ti-Cu-Fe eutectic alloy filler metal for Zircaloy-4”, Journal of Nuclear Materials, 441 (2013) pp. 431-438
7. H. Yu, H.S. Yu, G. Min, S.S. Park, B.S. You, Y.M. Kim*, Strain-dependent constitutive analysis of hot deformation and hot workability of T4-treated ZK60 magnesium alloy”, Metals and Materials International, 19 (2013) pp. 651-665
6. D.M. Kim, J. Kim, S.S. Park, H.W. Park*, H. Ki, “Surface modification of the patterned Al6061/SUS304 metal plates using the large electron beam”, Applied Surface Science, 261 (2012) pp. 458-463
5. E.J. Shin, A. Jung, S.H. Choi*, A.D. Rollett, S.S. Park, “A theoretical prediction of twin variants in extruded AZ31 Mg alloys using the microstructure based crystal plasticity finite element method”, Materials Science and Engineering A, 538 (2012) pp. 190-201
4. S.S. Park*, B.S. You, “Low-temperature superplasticity of extruded Mg-Sn-Al-Zn alloy”, Scripta Materialia, 65 (2011) pp. 202-205
3. W.L. Cheng, H.S. Kim, B.S. You, B.H. Koo, S.S. Park*, “Strength and ductility of novel Mg-8Sn-1Al-1Zn alloys extruded at different speeds”, Materials Letters, 65 (2011) pp. 1525-1527
2. W.N. Tang*, S.S. Park, B.S. You, “Effect of the Zn content on the microstructure and mechanical properties of indirect-extruded Mg-5Sn-xZn alloys”, Materials & Design, 32 (2011) pp. 3537-3543
1. S.S. Park*, Y.J. Kim, W.L. Cheng, Y.M. Kim, B.S. You, “Tensile properties of extruded Mg-8Sn-1Zn alloys subjected to different heat treatments”, Philosophical Magazine Letters, 91 (2011) pp. 37-44